dotfiles/.config/polybar/config.ini

501 lines
14 KiB
INI
Raw Normal View History

2021-03-28 17:11:08 +02:00
; Global WM Settings
[global/wm]
; Adjust the _NET_WM_STRUT_PARTIAL top value
; Used for top aligned bars
margin-bottom = 0
; Adjust the _NET_WM_STRUT_PARTIAL bottom value
; Used for bottom aligned bars
margin-top = 0
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; File Inclusion
; include an external file, like module file, etc.
include-file = ~/.config/polybar/colors.ini
include-file = ~/.config/polybar/modules.ini
include-file = ~/.config/polybar/custom/modules.ini
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Bar Settings
[bar/top]
; Use either of the following command to list available outputs:
; If unspecified, the application will pick the first one it finds.
; $ polybar -m | cut -d ':' -f 1
; $ xrandr -q | grep " connected" | cut -d ' ' -f1
monitor = ${env:MONITOR}
; Use the specified monitor as a fallback if the main one is not found.
monitor-fallback =
; Require the monitor to be in connected state
; XRandR sometimes reports my monitor as being disconnected (when in use)
monitor-strict = false
; Tell the Window Manager not to configure the window.
; Use this to detach the bar if your WM is locking its size/position.
override-redirect = false
; Put the bar at the bottom of the screen
bottom = false
; Prefer fixed center position for the `modules-center` block
; When false, the center position will be based on the size of the other blocks.
fixed-center = true
; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in a width or height of 50% minus 10 pixels
width = 100%
height = 30
; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in an offset in the x or y direction
; of 50% minus 10 pixels
offset-x = 0%
offset-y = 0%
; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
background = ${colors.background}
; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
foreground = ${colors.foreground}
; Background gradient (vertical steps)
; background-[0-9]+ = #aarrggbb
;;background-0 =
; Value used for drawing rounded corners
; Note: This shouldn't be used together with border-size because the border
; doesn't get rounded
; Individual top/bottom values can be defined using:
; radius-{top,bottom}
radius-top = 0.0
radius-bottom = 0.0
; Under-/overline pixel size and argb color
; Individual values can be defined using:
; {overline,underline}-size
; {overline,underline}-color
line-size = 2
2021-04-11 17:45:37 +02:00
line-color = ${colors.pink}
2021-03-28 17:11:08 +02:00
; Values applied to all borders
; Individual side values can be defined using:
; border-{left,top,right,bottom}-size
; border-{left,top,right,bottom}-color
; The top and bottom borders are added to the bar height, so the effective
; window height is:
; height + border-top-size + border-bottom-size
; Meanwhile the effective window width is defined entirely by the width key and
; the border is placed withing this area. So you effectively only have the
; following horizontal space on the bar:
; width - border-right-size - border-left-size
border-size = 0
border-bottom-color = ${colors.primary}
; Number of spaces to add at the beginning/end of the bar
; Individual side values can be defined using:
; padding-{left,right}
padding-left = 1
padding-right = 1
; Number of spaces to add before/after each module
; Individual side values can be defined using:
; module-margin-{left,right}
module-margin-left = 2
module-margin-right = 2
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
; Fonts are defined using <font-name>;<vertical-offset>
; Font names are specified using a fontconfig pattern.
; font-0 = NotoSans-Regular:size=8;2
; font-1 = MaterialIcons:size=10
; font-2 = Termsynu:size=8;-1
; font-3 = FontAwesome:size=10
; See the Fonts wiki page for more details
font-0 = "NotoSans Nerd Font:size=11;0"
font-1 = "FiraCode Nerd Font:size=11;3"
; Modules are added to one of the available blocks
; modules-left = cpu ram
; modules-center = xwindow xbacklight
; modules-right = ipc clock
modules-left = bspwm xwindow
modules-right = battery pulseaudio powermenu
modules-center = date
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
; The separator will be inserted between the output of each module
separator =
; Opacity value between 0.0 and 1.0 used on fade in/out
dim-value = 1.0
; Value to be used to set the WM_NAME atom
; If the value is empty or undefined, the atom value
; will be created from the following template: polybar-[BAR]_[MONITOR]
; NOTE: The placeholders are not available for custom values
wm-name =
; Locale used to localize various module data (e.g. date)
; Expects a valid libc locale, for example: sv_SE.UTF-8
locale =
; Position of the system tray window
; If empty or undefined, tray support will be disabled
; NOTE: A center aligned tray will cover center aligned modules
;
; Available positions:
; left
; center
; right
; none
tray-position = right
; If true, the bar will not shift its
; contents when the tray changes
tray-detached = false
; Tray icon max size
tray-maxsize = 16
; Background color for the tray container
; ARGB color (e.g. #f00, #ff992a, #ddff1023)
; By default the tray container will use the bar
; background color.
tray-background = ${colors.background}
; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
tray-offset-x = 0
tray-offset-y = 0
; Pad the sides of each tray icon
tray-padding = 2
; Scale factor for tray clients
tray-scale = 1.0
; Restack the bar window and put it above the
; selected window manager's root
;
; Fixes the issue where the bar is being drawn
; on top of fullscreen window's
;
; Currently supported WM's:
; bspwm
; i3 (requires: `override-redirect = true`)
wm-restack = bspwm
; Set a DPI values used when rendering text
; This only affects scalable fonts
; dpi =
; Enable support for inter-process messaging
; See the Messaging wiki page for more details.
enable-ipc = true
; Fallback click handlers that will be called if
; there's no matching module handler found.
click-left =
click-middle =
click-right =
;;scroll-up =
;;scroll-down =
double-click-left =
double-click-middle =
double-click-right =
; Requires polybar to be built with xcursor support (xcb-util-cursor)
; Possible values are:
; - default : The default pointer as before, can also be an empty string (default)
; - pointer : Typically in the form of a hand
; - ns-resize : Up and down arrows, can be used to indicate scrolling
cursor-click = pointer
cursor-scroll = ns-resize
;; WM Workspace Specific
; bspwm
;;scroll-up = #bspwm.next
;;scroll-down = #bspwm.prev
;;scroll-up = bspc desktop -f next.local
;;scroll-down = bspc desktop -f prev.local
;i3
;;scroll-up = i3wm-wsnext
;;scroll-down = i3wm-wspre
;;scroll-up = i3-msg workspace next_on_output
;;scroll-down = i3-msg workspace prev_on_output
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[bar/bottom]
; Use either of the following command to list available outputs:
; If unspecified, the application will pick the first one it finds.
; $ polybar -m | cut -d ':' -f 1
; $ xrandr -q | grep " connected" | cut -d ' ' -f1
monitor = ${env:MONITOR}
; Use the specified monitor as a fallback if the main one is not found.
monitor-fallback =
; Require the monitor to be in connected state
; XRandR sometimes reports my monitor as being disconnected (when in use)
monitor-strict = false
; Tell the Window Manager not to configure the window.
; Use this to detach the bar if your WM is locking its size/position.
override-redirect = false
; Put the bar at the bottom of the screen
bottom = true
; Prefer fixed center position for the `modules-center` block
; When false, the center position will be based on the size of the other blocks.
fixed-center = true
; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in a width or height of 50% minus 10 pixels
width = 100%
height = 30
; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in an offset in the x or y direction
; of 50% minus 10 pixels
offset-x = 0%
offset-y = 0%
; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
background = ${colors.background}
; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
foreground = ${colors.foreground}
; Background gradient (vertical steps)
; background-[0-9]+ = #aarrggbb
;;background-0 =
; Value used for drawing rounded corners
; Note: This shouldn't be used together with border-size because the border
; doesn't get rounded
; Individual top/bottom values can be defined using:
; radius-{top,bottom}
radius-top = 0.0
radius-bottom = 0.0
; Under-/overline pixel size and argb color
; Individual values can be defined using:
; {overline,underline}-size
; {overline,underline}-color
line-size = 2
2021-04-11 17:45:37 +02:00
line-color = ${colors.pink}
2021-03-28 17:11:08 +02:00
; Values applied to all borders
; Individual side values can be defined using:
; border-{left,top,right,bottom}-size
; border-{left,top,right,bottom}-color
; The top and bottom borders are added to the bar height, so the effective
; window height is:
; height + border-top-size + border-bottom-size
; Meanwhile the effective window width is defined entirely by the width key and
; the border is placed withing this area. So you effectively only have the
; following horizontal space on the bar:
; width - border-right-size - border-left-size
border-size = 0
2021-04-11 17:45:37 +02:00
border-bottom-color = ${colors.pink}
2021-03-28 17:11:08 +02:00
; Number of spaces to add at the beginning/end of the bar
; Individual side values can be defined using:
; padding-{left,right}
padding-left = 1
padding-right = 1
; Number of spaces to add before/after each module
; Individual side values can be defined using:
; module-margin-{left,right}
module-margin-left = 3
module-margin-right = 3
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
; Fonts are defined using <font-name>;<vertical-offset>
; Font names are specified using a fontconfig pattern.
; font-0 = NotoSans-Regular:size=8;2
; font-1 = MaterialIcons:size=10
; font-2 = Termsynu:size=8;-1
; font-3 = FontAwesome:size=10
; See the Fonts wiki page for more details
font-0 = "NotoSans Nerd Font:size=11;0"
; Modules are added to one of the available blocks
; modules-left = cpu ram
; modules-center = xwindow xbacklight
; modules-right = ipc clock
modules-left = cpu memory
2021-06-03 15:10:09 +02:00
modules-center =
2021-04-19 12:10:22 +02:00
modules-right = wlan eth
2021-03-28 17:11:08 +02:00
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
; The separator will be inserted between the output of each module
separator =
; Opacity value between 0.0 and 1.0 used on fade in/out
dim-value = 1.0
; Value to be used to set the WM_NAME atom
; If the value is empty or undefined, the atom value
; will be created from the following template: polybar-[BAR]_[MONITOR]
; NOTE: The placeholders are not available for custom values
wm-name =
; Locale used to localize various module data (e.g. date)
; Expects a valid libc locale, for example: sv_SE.UTF-8
locale =
; Position of the system tray window
; If empty or undefined, tray support will be disabled
; NOTE: A center aligned tray will cover center aligned modules
;
; Available positions:
; left
; center
; right
; none
2021-04-07 15:06:46 +02:00
tray-position = none
2021-03-28 17:11:08 +02:00
; If true, the bar will not shift its
; contents when the tray changes
tray-detached = false
; Tray icon max size
tray-maxsize = 16
; Background color for the tray container
; ARGB color (e.g. #f00, #ff992a, #ddff1023)
; By default the tray container will use the bar
; background color.
tray-background = ${colors.background}
; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
tray-offset-x = 0
tray-offset-y = 0
; Pad the sides of each tray icon
tray-padding = 2
; Scale factor for tray clients
tray-scale = 1.0
; Restack the bar window and put it above the
; selected window manager's root
;
; Fixes the issue where the bar is being drawn
; on top of fullscreen window's
;
; Currently supported WM's:
; bspwm
; i3 (requires: `override-redirect = true`)
wm-restack = bspwm
; Set a DPI values used when rendering text
; This only affects scalable fonts
; dpi =
; Enable support for inter-process messaging
; See the Messaging wiki page for more details.
enable-ipc = true
; Fallback click handlers that will be called if
; there's no matching module handler found.
click-left =
click-middle =
click-right =
scroll-up =
scroll-down =
double-click-left =
double-click-middle =
double-click-right =
; Requires polybar to be built with xcursor support (xcb-util-cursor)
; Possible values are:
; - default : The default pointer as before, can also be an empty string (default)
; - pointer : Typically in the form of a hand
; - ns-resize : Up and down arrows, can be used to indicate scrolling
cursor-click = pointer
cursor-scroll = ns-resize
;; WM Workspace Specific
; bspwm
;;scroll-up = #bspwm.next
;;scroll-down = #bspwm.prev
;;scroll-up = bspc desktop -f prev.local
;;scroll-down = bspc desktop -f next.local
;i3
;;scroll-up = i3wm-wsnext
;;scroll-down = i3wm-wsprev
;;scroll-up = i3-msg workspace next_on_output
;;scroll-down = i3-msg workspace prev_on_output
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Application Settings
[settings]
; The throttle settings lets the eventloop swallow up til X events
; if they happen within Y millisecond after first event was received.
; This is done to prevent flood of update event.
;
; For example if 5 modules emit an update event at the same time, we really
; just care about the last one. But if we wait too long for events to swallow
; the bar would appear sluggish so we continue if timeout
; expires or limit is reached.
throttle-output = 5
throttle-output-for = 10
; Time in milliseconds that the input handler will wait between processing events
;throttle-input-for = 30
; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
screenchange-reload = true
; Compositing operators
; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
;;compositing-background = source
;;compositing-foreground = over
;;compositing-overline = over
;;compositing-underline = over
;;compositing-border = over
; Define fallback values used by all module formats
;format-foreground =
;format-background =
;format-underline =
;format-overline =
;format-spacing =
;format-padding =
;format-margin =
;format-offset =
; Enables pseudo-transparency for the bar
; If set to true the bar can be transparent without a compositor.
pseudo-transparency = false
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_