From 0c3ed788218ff3a747ed870dd20db0d7adfa22e1 Mon Sep 17 00:00:00 2001 From: MoritzBoehme Date: Fri, 10 Sep 2021 12:11:51 +0000 Subject: [PATCH] deleted unnecessary files --- .gitignore | 92 ------ .gitmodules | 3 - .gtkrc-2.0 | 18 -- .vimrc | 17 - .xinitrc | 18 -- apply-system.sh => apply.sh | 0 config/bspwm/bspwmrc | 31 -- config/doom/config.el | 93 ------ config/doom/custom.el | 13 - config/doom/init.el | 188 ------------ config/doom/packages.el | 54 ---- config/doom/reload.sh | 8 - config/dunst/dunstrc | 430 -------------------------- config/kitty/dracula.conf | 59 ---- config/picom/launch.sh | 7 - config/picom/picom.conf | 494 ------------------------------ config/polybar/colors.ini | 18 -- config/polybar/config.ini | 281 ----------------- config/polybar/launch.sh | 14 - config/polybar/modules.ini | 224 -------------- config/rofi/dracula.rasi | 135 -------- config/rofi/dracula_old.rasi | 135 -------- config/sxhkd/sxhkdrc | 171 ----------- config/wallpaper/base.png | Bin 348137 -> 0 bytes system/configuration.nix | 110 ------- system/hardware-configuration.nix | 58 ---- update-users.sh => update.sh | 0 users/moritz/home.nix | 178 ----------- 28 files changed, 2849 deletions(-) delete mode 100644 .gitignore delete mode 100644 .gitmodules delete mode 100644 .gtkrc-2.0 delete mode 100755 .vimrc delete mode 100755 .xinitrc rename apply-system.sh => apply.sh (100%) delete mode 100755 config/bspwm/bspwmrc delete mode 100644 config/doom/config.el delete mode 100644 config/doom/custom.el delete mode 100644 config/doom/init.el delete mode 100644 config/doom/packages.el delete mode 100755 config/doom/reload.sh delete mode 100755 config/dunst/dunstrc delete mode 100755 config/kitty/dracula.conf delete mode 100755 config/picom/launch.sh delete mode 100755 config/picom/picom.conf delete mode 100755 config/polybar/colors.ini delete mode 100755 config/polybar/config.ini delete mode 100755 config/polybar/launch.sh delete mode 100755 config/polybar/modules.ini delete mode 100644 config/rofi/dracula.rasi delete mode 100644 config/rofi/dracula_old.rasi delete mode 100755 config/sxhkd/sxhkdrc delete mode 100644 config/wallpaper/base.png delete mode 100644 system/configuration.nix delete mode 100644 system/hardware-configuration.nix rename update-users.sh => update.sh (100%) delete mode 100644 users/moritz/home.nix diff --git a/.gitignore b/.gitignore deleted file mode 100644 index 02aab17..0000000 --- a/.gitignore +++ /dev/null @@ -1,92 +0,0 @@ -.SynologyDrive/ -.Xauthority -.bash_history -.bash_logout -.bash_profile -.bashrc -.cabal/ -.cache/ -.cargo/ -.config/.mono/ -.config/JetBrains/ -.config/KeePass/ -.config/QtProject.conf -.config/Signal/ -.config/Thunar/ -.config/VirtualBox/ -.config/aurutils/ -.config/autostart/ -.config/bpytop/ -.config/brittany/ -.config/calibre/ -.config/cargo/ -.config/cef_user_data/ -.config/chromium/ -.config/cowsay/ -.config/dconf/ -.config/discord/ -.config/docker/ -.config/emacs/ -.config/filelightrc -.config/filezilla/ -.config/flameshot/ -.config/gtk-2.0/ -.config/java/ -.config/kdeconnect/ -.config/keepassxc/ -.config/libreoffice/ -.config/lutris/ -.config/menus/ -.config/mimeapps.list -.config/neofetch/ -.config/noisetorch/ -.config/nordvpn/ -.config/pavucontrol.ini -.config/pipewire/ -.config/plex.tv/ -.config/pulse/ -.config/qalculate/ -.config/spicetify/ -.config/spotify/ -.config/swi-prolog/ -.config/systemd/ -.config/vlc/ -.config/xfce4/ -.config/zsh/.zcompdump -.config/zsh/.zsh_history -.dia/ -.emacs.d_/ -.fehbg -.ghc/ -.gnupg/ -.icons/ -.java/ -.jd/ -.lesshsQ -.lesshst -.local/ -.m2/ -.mozilla/ -.nordnm/ -.npm/ -.pki/ -.pulse-cookie -.putty/ -.ssh/ -.themes -.tor-browser/ -.vim/ -.viminfo -.viminfo.tmp -.wget-hsts -.wine/ -.zsh_history -Documents/ -Downloads/ -Keepass/ -Pictures/ -Universitaet -VirtualBox\ VMs/ -aur/ -dotfiles/ -org-roam/ diff --git a/.gitmodules b/.gitmodules deleted file mode 100644 index 8ce8052..0000000 --- a/.gitmodules +++ /dev/null @@ -1,3 +0,0 @@ -[submodule ".config/spicetify/Themes"] - path = .config/spicetify/Themes - url = https://github.com/morpheusthewhite/spicetify-themes.git diff --git a/.gtkrc-2.0 b/.gtkrc-2.0 deleted file mode 100644 index 44d77f4..0000000 --- a/.gtkrc-2.0 +++ /dev/null @@ -1,18 +0,0 @@ -# DO NOT EDIT! This file will be overwritten by LXAppearance. -# Any customization should be done in ~/.gtkrc-2.0.mine instead. - -include "/home/moritz/.gtkrc-2.0.mine" -gtk-theme-name="dracula" -gtk-icon-theme-name="dracula-icons" -gtk-font-name="Cantarell 11" -gtk-cursor-theme-name="Adwaita" -gtk-cursor-theme-size=0 -gtk-toolbar-style=GTK_TOOLBAR_BOTH -gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR -gtk-button-images=1 -gtk-menu-images=1 -gtk-enable-event-sounds=1 -gtk-enable-input-feedback-sounds=1 -gtk-xft-antialias=1 -gtk-xft-hinting=1 -gtk-xft-hintstyle="hintfull" diff --git a/.vimrc b/.vimrc deleted file mode 100755 index 9081b74..0000000 --- a/.vimrc +++ /dev/null @@ -1,17 +0,0 @@ -inoremap jk - -set tabstop=4 -set shiftwidth=4 - -syntax on " highlight syntax - -set number " show line numbers -set noswapfile " disable the swapfile -set hlsearch " highlight all results -set ignorecase " ignore case in search -set incsearch " show search results as you type - -vmap "+yi -vmap "+c -vmap c"+p -imap + diff --git a/.xinitrc b/.xinitrc deleted file mode 100755 index 631a60b..0000000 --- a/.xinitrc +++ /dev/null @@ -1,18 +0,0 @@ -#!/bin/bash -# -# ~/.xinitrc -# -# Executed by startx (run your window manager from here) - -# Automatic brightness controll -[[ $(uname -n) == *"laptop"* ]] && clight & - -# Set cursor -xsetroot -cursor_name left_ptr - -[[ $(uname -n) == *"desktop"* ]] && xrandr --output HDMI-0 --primary --output HDMI-1 --left-of HDMI-0 - -systemctl --user set-environment DISPLAY=:0 -systemctl --user --no-block start xsession.target - -exec bspwm diff --git a/apply-system.sh b/apply.sh similarity index 100% rename from apply-system.sh rename to apply.sh diff --git a/config/bspwm/bspwmrc b/config/bspwm/bspwmrc deleted file mode 100755 index 6ba1a68..0000000 --- a/config/bspwm/bspwmrc +++ /dev/null @@ -1,31 +0,0 @@ -#!/usr/bin/env bash - -# MONITORS # -if [[ "$(uname -n)" == *'desktop'* ]]; then - bspc monitor HDMI-0 -d 1 2 3 4 5 - bspc monitor HDMI-1 -d 6 7 8 9 10 -else - bspc monitor -d 1 2 3 4 5 6 7 8 9 -fi - -# CONFIGURATION # - -bspc config border_width 2 -bspc config window_gap 5 -bspc config borderless_monocle true -bspc config gapless_monocle true -bspc config focus_follows_pointer true - -# Dracula theme # - -bspc config focused_border_color "#bd93f9" - -# WINDOW RULES # -bspc rule -a Steam state=tiled -bspc rule -a Zathura state=tiled -bspc rule -a Emacs state=tiled - -# AUTOSTART # -[[ ! $(pidof -x sxhkd) ]] && sxhkd & -feh --bg-fill ~/.dotfiles/config/wallpaper/base.png -systemctl --user start polybar diff --git a/config/doom/config.el b/config/doom/config.el deleted file mode 100644 index 54e32f2..0000000 --- a/config/doom/config.el +++ /dev/null @@ -1,93 +0,0 @@ -;;; $DOOMDIR/config.el -*- lexical-binding: t; -*- - -;; Place your private configuration here! Remember, you do not need to run 'doom -;; sync' after modifying this file! - - -;; Some functionality uses this to identify you, e.g. GPG configuration, email -;; clients, file templates and snippets. -(setq user-full-name "Moritz Böhme" - user-mail-address "mail@moritzboeh.me") - -;; Doom exposes five (optional) variables for controlling fonts in Doom. Here -;; are the three important ones: -;; -;; + `doom-font' -;; + `doom-variable-pitch-font' -;; + `doom-big-font' -- used for `doom-big-font-mode'; use this for -;; presentations or streaming. -;; -;; They all accept either a font-spec, font string ("Input Mono-12"), or xlfd -;; font string. You generally only need these two: -;; (setq doom-font (font-spec :family "monospace" :size 12 :weight 'semi-light) -;; doom-variable-pitch-font (font-spec :family "sans" :size 13)) - -;; There are two ways to load a theme. Both assume the theme is installed and -;; available. You can either set `doom-theme' or manually load a theme with the -;; `load-theme' function. This is the default: -(setq doom-theme 'doom-dracula) - -;; If you use `org' and don't want your org files in the default location below, -;; change `org-directory'. It must be set before org loads! -(setq org-directory "~/Documents/org") - -;; This determines the style of line numbers in effect. If set to `nil', line -;; numbers are disabled. For relative line numbers, set this to `relative'. -(setq display-line-numbers-type t) - - -;; Here are some additional functions/macros that could help you configure Doom: -;; -;; - `load!' for loading external *.el files relative to this one -;; - `use-package!' for configuring packages -;; - `after!' for running code after a package has loaded -;; - `add-load-path!' for adding directories to the `load-path', relative to -;; this file. Emacs searches the `load-path' when you load packages with -;; `require' or `use-package'. -;; - `map!' for binding new keys -;; -;; To get information about any of these functions/macros, move the cursor over -;; the highlighted symbol at press 'K' (non-evil users must press 'C-c c k'). -;; This will open documentation for it, including demos of how they are used. -;; -;; You can also try 'gd' (or 'C-c c d') to jump to their definition and see how -;; they are implemented. - -;; Set FiraCode as Font -(setq doom-font (font-spec :family "FiraCode Nerd Font" :size 13) ) - -(setq ispell-dictionary "english") -;; Switch Flyspell Dictionary -(defun fd-switch-dictionary() -(interactive) -(let* ((dic ispell-current-dictionary) - (change (if (string= dic "deutsch") "english" "deutsch"))) - (ispell-change-dictionary change) - (message "Dictionary switched from %s to %s" dic change) - )) - (global-set-key (kbd "") 'fd-switch-dictionary) - - -(add-to-list 'auto-mode-alist '("\\.pl\\'" . prolog-mode)) - -(setq org-roam-directory "~/org-roam") -(after! org-roam - :custom - (setq org-roam-capture-templates - '( - ("d" "default" plain - "%?" - :if-new (file+head "%<%Y%m%d%H%M%S>-${slug}.org" "#+title: ${title}\n") - :unnarrowed t) - ("s" "semester" plain (file "~/org-roam/templates/semester-template.org") - :if-new (file+head "%<%Y%m%d%H%M%S>-${slug}.org" "#+title: ${title}\n") - :unnarrowed t) - ("m" "modul" plain (file "~/org-roam/templates/modul-template.org") - :if-new (file+head "%<%Y%m%d%H%M%S>-${slug}.org" "#+title: ${title}\n") - :unnarrowed t) - ("D" "dozent" plain (file "~/org-roam/templates/dozent-template.org") - :if-new (file+head "%<%Y%m%d%H%M%S>-${slug}.org" "#+title: ${title}\n") - :unnarrowed t) - ) - ) - ) diff --git a/config/doom/custom.el b/config/doom/custom.el deleted file mode 100644 index 170e3f3..0000000 --- a/config/doom/custom.el +++ /dev/null @@ -1,13 +0,0 @@ -(custom-set-variables - ;; custom-set-variables was added by Custom. - ;; If you edit it by hand, you could mess it up, so be careful. - ;; Your init file should contain only one such instance. - ;; If there is more than one, they won't work right. - '(org-agenda-files - '("/home/moritz/Documents/org/wochen" "/home/moritz/Documents/org/"))) -(custom-set-faces - ;; custom-set-faces was added by Custom. - ;; If you edit it by hand, you could mess it up, so be careful. - ;; Your init file should contain only one such instance. - ;; If there is more than one, they won't work right. - ) diff --git a/config/doom/init.el b/config/doom/init.el deleted file mode 100644 index d42c437..0000000 --- a/config/doom/init.el +++ /dev/null @@ -1,188 +0,0 @@ -;;; init.el -*- lexical-binding: t; -*- - -;; This file controls what Doom modules are enabled and what order they load -;; in. Remember to run 'doom sync' after modifying it! - -;; NOTE Press 'SPC h d h' (or 'C-h d h' for non-vim users) to access Doom's -;; documentation. There you'll find a "Module Index" link where you'll find -;; a comprehensive list of Doom's modules and what flags they support. - -;; NOTE Move your cursor over a module's name (or its flags) and press 'K' (or -;; 'C-c c k' for non-vim users) to view its documentation. This works on -;; flags as well (those symbols that start with a plus). -;; -;; Alternatively, press 'gd' (or 'C-c c d') on a module to browse its -;; directory (for easy access to its source code). - -(doom! :input - ;;chinese - ;;japanese - ;;layout ; auie,ctsrnm is the superior home row - - :completion - company ; the ultimate code completion backend - ;;helm ; the *other* search engine for love and life - ;;ido ; the other *other* search engine... - ivy ; a search engine for love and life - - :ui - ;;deft ; notational velocity for Emacs - doom ; what makes DOOM look the way it does - doom-dashboard ; a nifty splash screen for Emacs - doom-quit ; DOOM quit-message prompts when you quit Emacs - (emoji +unicode) ; 🙂 - ;;fill-column ; a `fill-column' indicator - hl-todo ; highlight TODO/FIXME/NOTE/DEPRECATED/HACK/REVIEW - ;;hydra - ;;indent-guides ; highlighted indent columns - ligatures ; ligatures and symbols to make your code pretty again - ;;minimap ; show a map of the code on the side - modeline ; snazzy, Atom-inspired modeline, plus API - ;;nav-flash ; blink cursor line after big motions - neotree ; a project drawer, like NERDTree for vim - ophints ; highlight the region an operation acts on - (popup +defaults) ; tame sudden yet inevitable temporary windows - ;;tabs ; a tab bar for Emacs - treemacs ; a project drawer, like neotree but cooler - ;;unicode ; extended unicode support for various languages - vc-gutter ; vcs diff in the fringe - vi-tilde-fringe ; fringe tildes to mark beyond EOB - ;;window-select ; visually switch windows - workspaces ; tab emulation, persistence & separate workspaces - ;;zen ; distraction-free coding or writing - - :editor - (evil +everywhere) ; come to the dark side, we have cookies - file-templates ; auto-snippets for empty files - fold ; (nigh) universal code folding - (format +onsave) ; automated prettiness - ;;god ; run Emacs commands without modifier keys - ;;lispy ; vim for lisp, for people who don't like vim - ;;multiple-cursors ; editing in many places at once - ;;objed ; text object editing for the innocent - ;;parinfer ; turn lisp into python, sort of - ;;rotate-text ; cycle region at point between text candidates - snippets ; my elves. They type so I don't have to - ;;word-wrap ; soft wrapping with language-aware indent - - :emacs - dired ; making dired pretty [functional] - electric ; smarter, keyword-based electric-indent - ;;ibuffer ; interactive buffer management - undo ; persistent, smarter undo for your inevitable mistakes - vc ; version-control and Emacs, sitting in a tree - - :term - ;;eshell ; the elisp shell that works everywhere - ;;shell ; simple shell REPL for Emacs - ;;term ; basic terminal emulator for Emacs - vterm ; the best terminal emulation in Emacs - - :checkers - syntax ; tasing you for every semicolon you forget - (spell +flyspell) ; tasing you for misspelling mispelling - ;;grammar ; tasing grammar mistake every you make - - :tools - ;;ansible - ;;debugger ; FIXME stepping through code, to help you add bugs - ;;direnv - ;;docker - ;;editorconfig ; let someone else argue about tabs vs spaces - ;;ein ; tame Jupyter notebooks with emacs - (eval +overlay) ; run code, run (also, repls) - ;;gist ; interacting with github gists - lookup ; navigate your code and its documentation - ;;lsp - magit ; a git porcelain for Emacs - ;;make ; run make tasks from Emacs - ;;pass ; password manager for nerds - pdf ; pdf enhancements - ;;prodigy ; FIXME managing external services & code builders - ;;rgb ; creating color strings - ;;taskrunner ; taskrunner for all your projects - ;;terraform ; infrastructure as code - ;;tmux ; an API for interacting with tmux - ;;upload ; map local to remote projects via ssh/ftp - - :os - (:if IS-MAC macos) ; improve compatibility with macOS - tty ; improve the terminal Emacs experience - - :lang - ;;agda ; types of types of types of types... - ;;beancount ; mind the GAAP - cc ; C > C++ == 1 - ;;clojure ; java with a lisp - ;;common-lisp ; if you've seen one lisp, you've seen them all - ;;coq ; proofs-as-programs - ;;crystal ; ruby at the speed of c - ;;csharp ; unity, .NET, and mono shenanigans - ;;data ; config/data formats - ;;(dart +flutter) ; paint ui and not much else - ;;elixir ; erlang done right - ;;elm ; care for a cup of TEA? - emacs-lisp ; drown in parentheses - ;;erlang ; an elegant language for a more civilized age - ;;ess ; emacs speaks statistics - ;;factor - ;;faust ; dsp, but you get to keep your soul - ;;fsharp ; ML stands for Microsoft's Language - ;;fstar ; (dependent) types and (monadic) effects and Z3 - ;;gdscript ; the language you waited for - ;;(go +lsp) ; the hipster dialect - (haskell +dante) ; a language that's lazier than I am - ;;hy ; readability of scheme w/ speed of python - ;;idris ; a language you can depend on - ;;json ; At least it ain't XML - ;;(java +meghanada) ; the poster child for carpal tunnel syndrome - ;;javascript ; all(hope(abandon(ye(who(enter(here)))))) - ;;julia ; a better, faster MATLAB - ;;kotlin ; a better, slicker Java(Script) - latex ; writing papers in Emacs has never been so fun - ;;lean ; for folks with too much to prove - ;;ledger ; be audit you can be - ;;lua ; one-based indices? one-based indices - markdown ; writing docs for people to ignore - ;;nim ; python + lisp at the speed of c - nix ; I hereby declare "nix geht mehr!" - ;;ocaml ; an objective camel - (org +roam2) ; organize your plain life in plain text - ;;php ; perl's insecure younger brother - ;;plantuml ; diagrams for confusing people more - ;;purescript ; javascript, but functional - ;;python ; beautiful is better than ugly - ;;qt ; the 'cutest' gui framework ever - ;;racket ; a DSL for DSLs - ;;raku ; the artist formerly known as perl6 - ;;rest ; Emacs as a REST client - ;;rst ; ReST in peace - ;;(ruby +rails) ; 1.step {|i| p "Ruby is #{i.even? ? 'love' : 'life'}"} - ;;rust ; Fe2O3.unwrap().unwrap().unwrap().unwrap() - ;;scala ; java, but good - ;;(scheme +guile) ; a fully conniving family of lisps - sh ; she sells {ba,z,fi}sh shells on the C xor - ;;sml - ;;solidity ; do you need a blockchain? No. - ;;swift ; who asked for emoji variables? - ;;terra ; Earth and Moon in alignment for performance. - ;;web ; the tubes - ;;yaml ; JSON, but readable - ;;zig ; C, but simpler - - :email - ;;(mu4e +gmail) - ;;notmuch - ;;(wanderlust +gmail) - - :app - ;;calendar - ;;emms - ;;everywhere ; *leave* Emacs!? You must be joking - ;;irc ; how neckbeards socialize - ;;(rss +org) ; emacs as an RSS reader - ;;twitter ; twitter client https://twitter.com/vnought - - :config - ;;literate - (default +bindings +smartparens)) diff --git a/config/doom/packages.el b/config/doom/packages.el deleted file mode 100644 index e81d4c4..0000000 --- a/config/doom/packages.el +++ /dev/null @@ -1,54 +0,0 @@ -;; -*- no-byte-compile: t; -*- -;;; $DOOMDIR/packages.el - -;; To install a package with Doom you must declare them here and run 'doom sync' -;; on the command line, then restart Emacs for the changes to take effect -- or -;; use 'M-x doom/reload'. - - -;; To install SOME-PACKAGE from MELPA, ELPA or emacsmirror: -;(package! some-package) - -;; To install a package directly from a remote git repo, you must specify a -;; `:recipe'. You'll find documentation on what `:recipe' accepts here: -;; https://github.com/raxod502/straight.el#the-recipe-format -;(package! another-package -; :recipe (:host github :repo "username/repo")) - -;; If the package you are trying to install does not contain a PACKAGENAME.el -;; file, or is located in a subdirectory of the repo, you'll need to specify -;; `:files' in the `:recipe': -;(package! this-package -; :recipe (:host github :repo "username/repo" -; :files ("some-file.el" "src/lisp/*.el"))) - -;; If you'd like to disable a package included with Doom, you can do so here -;; with the `:disable' property: -;(package! builtin-package :disable t) - -;; You can override the recipe of a built in package without having to specify -;; all the properties for `:recipe'. These will inherit the rest of its recipe -;; from Doom or MELPA/ELPA/Emacsmirror: -;(package! builtin-package :recipe (:nonrecursive t)) -;(package! builtin-package-2 :recipe (:repo "myfork/package")) - -;; Specify a `:branch' to install a package from a particular branch or tag. -;; This is required for some packages whose default branch isn't 'master' (which -;; our package manager can't deal with; see raxod502/straight.el#279) -;(package! builtin-package :recipe (:branch "develop")) - -;; Use `:pin' to specify a particular commit to install. -;(package! builtin-package :pin "1a2b3c4d5e") - - -;; Doom's packages are pinned to a specific commit and updated from release to -;; release. The `unpin!' macro allows you to unpin single packages... -;(unpin! pinned-package) -;; ...or multiple packages -;(unpin! pinned-package another-pinned-package) -;; ...Or *all* packages (NOT RECOMMENDED; will likely break things) -;(unpin! t) - -(package! evil-tutor) -(package! ligatures - :recipe (:host github :repo "mickeynp/ligature.el")) diff --git a/config/doom/reload.sh b/config/doom/reload.sh deleted file mode 100755 index 3273156..0000000 --- a/config/doom/reload.sh +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/sh -DOOM="$HOME/.emacs.d" -if [ ! -d "$DOOM" ]; then - git clone https://github.com/hlissner/doom-emacs.git "$DOOM" - "$DOOM/bin/doom" -y install -fi - -"$DOOM/bin/doom" sync diff --git a/config/dunst/dunstrc b/config/dunst/dunstrc deleted file mode 100755 index e820fff..0000000 --- a/config/dunst/dunstrc +++ /dev/null @@ -1,430 +0,0 @@ -[global] - ### Display ### - - # Which monitor should the notifications be displayed on. - monitor = 0 - - # Display notification on focused monitor. Possible modes are: - # mouse: follow mouse pointer - # keyboard: follow window with keyboard focus - # none: don't follow anything - # - # "keyboard" needs a window manager that exports the - # _NET_ACTIVE_WINDOW property. - # This should be the case for almost all modern window managers. - # - # If this option is set to mouse or keyboard, the monitor option - # will be ignored. - follow = mouse - - # The geometry of the window: - # [{width}]x{height}[+/-{x}+/-{y}] - # The geometry of the message window. - # The height is measured in number of notifications everything else - # in pixels. If the width is omitted but the height is given - # ("-geometry x2"), the message window expands over the whole screen - # (dmenu-like). If width is 0, the window expands to the longest - # message displayed. A positive x is measured from the left, a - # negative from the right side of the screen. Y is measured from - # the top and down respectively. - # The width can be negative. In this case the actual width is the - # screen width minus the width defined in within the geometry option. - geometry = "0x4-25+25" - - # Show how many messages are currently hidden (because of geometry). - indicate_hidden = yes - - # Shrink window if it's smaller than the width. Will be ignored if - # width is 0. - shrink = no - - # The transparency of the window. Range: [0; 100]. - # This option will only work if a compositing window manager is - # present (e.g. xcompmgr, compiz, etc.). - transparency = 15 - - # The height of the entire notification. If the height is smaller - # than the font height and padding combined, it will be raised - # to the font height and padding. - notification_height = 0 - - # Draw a line of "separator_height" pixel height between two - # notifications. - # Set to 0 to disable. - separator_height = 1 - - # Padding between text and separator. - padding = 8 - - # Horizontal padding. - horizontal_padding = 10 - - # Defines width in pixels of frame around the notification window. - # Set to 0 to disable. - frame_width = 0 - - # Defines color of the frame around the notification window. - frame_color = "#282a36" - - # Define a color for the separator. - # possible values are: - # * auto: dunst tries to find a color fitting to the background; - # * foreground: use the same color as the foreground; - # * frame: use the same color as the frame; - # * anything else will be interpreted as a X color. - separator_color = frame - - # Sort messages by urgency. - sort = yes - - # Don't remove messages, if the user is idle (no mouse or keyboard input) - # for longer than idle_threshold seconds. - # Set to 0 to disable. - # A client can set the 'transient' hint to bypass this. See the rules - # section for how to disable this if necessary - idle_threshold = 120 - - ### Text ### - - font = Monospace 10 - - # The spacing between lines. If the height is smaller than the - # font height, it will get raised to the font height. - line_height = 0 - - # Possible values are: - # full: Allow a small subset of html markup in notifications: - # bold - # italic - # strikethrough - # underline - # - # For a complete reference see - # . - # - # strip: This setting is provided for compatibility with some broken - # clients that send markup even though it's not enabled on the - # server. Dunst will try to strip the markup but the parsing is - # simplistic so using this option outside of matching rules for - # specific applications *IS GREATLY DISCOURAGED*. - # - # no: Disable markup parsing, incoming notifications will be treated as - # plain text. Dunst will not advertise that it has the body-markup - # capability if this is set as a global setting. - # - # It's important to note that markup inside the format option will be parsed - # regardless of what this is set to. - markup = full - - # The format of the message. Possible variables are: - # %a appname - # %s summary - # %b body - # %i iconname (including its path) - # %I iconname (without its path) - # %p progress value if set ([ 0%] to [100%]) or nothing - # %n progress value if set without any extra characters - # %% Literal % - # Markup is allowed - format = "%s %p\n%b" - - # Alignment of message text. - # Possible values are "left", "center" and "right". - alignment = left - - # Vertical alignment of message text and icon. - # Possible values are "top", "center" and "bottom". - vertical_alignment = center - - # Show age of message if message is older than show_age_threshold - # seconds. - # Set to -1 to disable. - show_age_threshold = 60 - - # Split notifications into multiple lines if they don't fit into - # geometry. - word_wrap = yes - - # When word_wrap is set to no, specify where to make an ellipsis in long lines. - # Possible values are "start", "middle" and "end". - ellipsize = middle - - # Ignore newlines '\n' in notifications. - ignore_newline = no - - # Stack together notifications with the same content - stack_duplicates = true - - # Hide the count of stacked notifications with the same content - hide_duplicate_count = false - - # Display indicators for URLs (U) and actions (A). - show_indicators = yes - - ### Icons ### - - # Align icons left/right/off - icon_position = left - - # Scale small icons up to this size, set to 0 to disable. Helpful - # for e.g. small files or high-dpi screens. In case of conflict, - # max_icon_size takes precedence over this. - min_icon_size = 0 - - # Scale larger icons down to this size, set to 0 to disable - max_icon_size = 64 - - # Paths to default icons. - icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/ - - ### History ### - - # Should a notification popped up from history be sticky or timeout - # as if it would normally do. - sticky_history = yes - - # Maximum amount of notifications kept in history - history_length = 20 - - ### Misc/Advanced ### - - # dmenu path. - dmenu = /usr/bin/dmenu -p dunst: - - # Browser for opening urls in context menu. - browser = /usr/bin/firefox -new-tab - - # Always run rule-defined scripts, even if the notification is suppressed - always_run_script = true - - # Define the title of the windows spawned by dunst - title = Dunst - - # Define the class of the windows spawned by dunst - class = Dunst - - # Print a notification on startup. - # This is mainly for error detection, since dbus (re-)starts dunst - # automatically after a crash. - startup_notification = false - - # Manage dunst's desire for talking - # Can be one of the following values: - # crit: Critical features. Dunst aborts - # warn: Only non-fatal warnings - # mesg: Important Messages - # info: all unimportant stuff - # debug: all less than unimportant stuff - verbosity = mesg - - # Define the corner radius of the notification window - # in pixel size. If the radius is 0, you have no rounded - # corners. - # The radius will be automatically lowered if it exceeds half of the - # notification height to avoid clipping text and/or icons. - corner_radius = 0 - - # Ignore the dbus closeNotification message. - # Useful to enforce the timeout set by dunst configuration. Without this - # parameter, an application may close the notification sent before the - # user defined timeout. - ignore_dbusclose = false - - ### Legacy - - # Use the Xinerama extension instead of RandR for multi-monitor support. - # This setting is provided for compatibility with older nVidia drivers that - # do not support RandR and using it on systems that support RandR is highly - # discouraged. - # - # By enabling this setting dunst will not be able to detect when a monitor - # is connected or disconnected which might break follow mode if the screen - # layout changes. - force_xinerama = false - - ### mouse - - # Defines list of actions for each mouse event - # Possible values are: - # * none: Don't do anything. - # * do_action: If the notification has exactly one action, or one is marked as default, - # invoke it. If there are multiple and no default, open the context menu. - # * close_current: Close current notification. - # * close_all: Close all notifications. - # These values can be strung together for each mouse event, and - # will be executed in sequence. - mouse_left_click = close_current - mouse_middle_click = do_action, close_current - mouse_right_click = close_all - -# Experimental features that may or may not work correctly. Do not expect them -# to have a consistent behaviour across releases. -[experimental] - # Calculate the dpi to use on a per-monitor basis. - # If this setting is enabled the Xft.dpi value will be ignored and instead - # dunst will attempt to calculate an appropriate dpi value for each monitor - # using the resolution and physical size. This might be useful in setups - # where there are multiple screens with very different dpi values. - per_monitor_dpi = false - -[shortcuts] - - # Shortcuts are specified as [modifier+][modifier+]...key - # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2", - # "mod3" and "mod4" (windows-key). - # Xev might be helpful to find names for keys. - - # Close notification. - close = ctrl+space - - # Close all notifications. - close_all = ctrl+shift+space - - # Redisplay last message(s). - # On the US keyboard layout "grave" is normally above TAB and left - # of "1". Make sure this key actually exists on your keyboard layout, - # e.g. check output of 'xmodmap -pke' - history = ctrl+grave - - # Context menu. - context = ctrl+shift+period - -[urgency_low] - # IMPORTANT: colors have to be defined in quotation marks. - # Otherwise the "#" and following would be interpreted as a comment. - background = "#282a36" - foreground = "#6272a4" - timeout = 10 - # Icon for notifications with low urgency, uncomment to enable - #icon = /path/to/icon - -[urgency_normal] - background = "#282a36" - foreground = "#bd93f9" - timeout = 10 - # Icon for notifications with normal urgency, uncomment to enable - #icon = /path/to/icon - -[urgency_critical] - background = "#ff5555" - foreground = "#f8f8f2" - timeout = 0 - # Icon for notifications with critical urgency, uncomment to enable - #icon = /path/to/icon - -# Every section that isn't one of the above is interpreted as a rules to -# override settings for certain messages. -# -# Messages can be matched by -# appname (discouraged, see desktop_entry) -# body -# category -# desktop_entry -# icon -# match_transient -# msg_urgency -# stack_tag -# summary -# -# and you can override the -# background -# foreground -# format -# frame_color -# fullscreen -# new_icon -# set_stack_tag -# set_transient -# timeout -# urgency -# -# Shell-like globbing will get expanded. -# -# Instead of the appname filter, it's recommended to use the desktop_entry filter. -# GLib based applications export their desktop-entry name. In comparison to the appname, -# the desktop-entry won't get localized. -# -# SCRIPTING -# You can specify a script that gets run when the rule matches by -# setting the "script" option. -# The script will be called as follows: -# script appname summary body icon urgency -# where urgency can be "LOW", "NORMAL" or "CRITICAL". -# -# NOTE: if you don't want a notification to be displayed, set the format -# to "". -# NOTE: It might be helpful to run dunst -print in a terminal in order -# to find fitting options for rules. - -# Disable the transient hint so that idle_threshold cannot be bypassed from the -# client -#[transient_disable] -# match_transient = yes -# set_transient = no -# -# Make the handling of transient notifications more strict by making them not -# be placed in history. -#[transient_history_ignore] -# match_transient = yes -# history_ignore = yes - -# fullscreen values -# show: show the notifications, regardless if there is a fullscreen window opened -# delay: displays the new notification, if there is no fullscreen window active -# If the notification is already drawn, it won't get undrawn. -# pushback: same as delay, but when switching into fullscreen, the notification will get -# withdrawn from screen again and will get delayed like a new notification -#[fullscreen_delay_everything] -# fullscreen = delay -#[fullscreen_show_critical] -# msg_urgency = critical -# fullscreen = show - -#[espeak] -# summary = "*" -# script = dunst_espeak.sh - -#[script-test] -# summary = "*script*" -# script = dunst_test.sh - -#[ignore] -# # This notification will not be displayed -# summary = "foobar" -# format = "" - -#[history-ignore] -# # This notification will not be saved in history -# summary = "foobar" -# history_ignore = yes - -#[skip-display] -# # This notification will not be displayed, but will be included in the history -# summary = "foobar" -# skip_display = yes - -#[signed_on] -# appname = Pidgin -# summary = "*signed on*" -# urgency = low -# -#[signed_off] -# appname = Pidgin -# summary = *signed off* -# urgency = low -# -#[says] -# appname = Pidgin -# summary = *says* -# urgency = critical -# -#[twitter] -# appname = Pidgin -# summary = *twitter.com* -# urgency = normal -# -#[stack-volumes] -# appname = "some_volume_notifiers" -# set_stack_tag = "volume" -# -# vim: ft=cfg diff --git a/config/kitty/dracula.conf b/config/kitty/dracula.conf deleted file mode 100755 index bcf5a1e..0000000 --- a/config/kitty/dracula.conf +++ /dev/null @@ -1,59 +0,0 @@ -# https://draculatheme.com/kitty -# -# Installation instructions: -# -# cp dracula.conf ~/.config/kitty/ -# echo "include dracula.conf" >> ~/.config/kitty/kitty.conf -# -# Then reload kitty for the config to take affect. -# Alternatively copy paste below directly into kitty.conf - -foreground #f8f8f2 -background #282a36 -#background #000000 -selection_foreground #44475a -selection_background #f8f8f2 - -url_color #ffb86c - -# black -color0 #21222c -color8 #6272a4 - -# red -color1 #ff5555 -color9 #ff6e6e - -# green -color2 #50fa7b -color10 #69ff94 - -# yellow -color3 #f1fa8c -color11 #ffffa5 - -# blue -color4 #bd93f9 -color12 #d6acff - -# magenta -color5 #ff79c6 -color13 #ff92df - -# cyan -color6 #8be9fd -color14 #a4ffff - -# white -color7 #f8f8f2 -color15 #ffffff - -# Cursor colors -cursor #6272a4 -cursor_text_color background - -# Tab bar colors -active_tab_foreground #44475a -active_tab_background #f8f8f2 -inactive_tab_foreground #282a36 -inactive_tab_background #6272a4 diff --git a/config/picom/launch.sh b/config/picom/launch.sh deleted file mode 100755 index 62f5de6..0000000 --- a/config/picom/launch.sh +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/sh - -if ps -A | grep picom; then - killall -q picom -fi - -picom --experimental-backends diff --git a/config/picom/picom.conf b/config/picom/picom.conf deleted file mode 100755 index f614ea0..0000000 --- a/config/picom/picom.conf +++ /dev/null @@ -1,494 +0,0 @@ -################################# -# Animations # -################################# -# requires https://github.com/jonaburg/picom -# (These are also the default values) -transition-length = 300 -transition-pow-x = 0.1 -transition-pow-y = 0.1 -transition-pow-w = 0.1 -transition-pow-h = 0.1 -size-transition = true - - -################################# -# Corners # -################################# -# requires: https://github.com/sdhand/compton or https://github.com/jonaburg/picom -corner-radius = 10.0; -rounded-corners-exclude = [ - "class_g = 'Polybar'", - "class_g = 'Rofi'", - ]; -round-borders = 1; -round-borders-exclude = [ - #"class_g = 'TelegramDesktop'", -]; - -################################# -# Shadows # -################################# - - -# Enabled client-side shadows on windows. Note desktop windows -# (windows with '_NET_WM_WINDOW_TYPE_DESKTOP') never get shadow, -# unless explicitly requested using the wintypes option. -# -# shadow = false -shadow = true; - -# The blur radius for shadows, in pixels. (defaults to 12) -# shadow-radius = 12 -shadow-radius = 7; - -# The opacity of shadows. (0.0 - 1.0, defaults to 0.75) -# shadow-opacity = .75 - -# The left offset for shadows, in pixels. (defaults to -15) -# shadow-offset-x = -15 -shadow-offset-x = -7; - -# The top offset for shadows, in pixels. (defaults to -15) -# shadow-offset-y = -15 -shadow-offset-y = -7; - -# Avoid drawing shadows on dock/panel windows. This option is deprecated, -# you should use the *wintypes* option in your config file instead. -# -# no-dock-shadow = false - -# Don't draw shadows on drag-and-drop windows. This option is deprecated, -# you should use the *wintypes* option in your config file instead. -# -# no-dnd-shadow = false - -# Red color value of shadow (0.0 - 1.0, defaults to 0). -# shadow-red = 0 - -# Green color value of shadow (0.0 - 1.0, defaults to 0). -# shadow-green = 0 - -# Blue color value of shadow (0.0 - 1.0, defaults to 0). -# shadow-blue = 0 - -# Do not paint shadows on shaped windows. Note shaped windows -# here means windows setting its shape through X Shape extension. -# Those using ARGB background is beyond our control. -# Deprecated, use -# shadow-exclude = 'bounding_shaped' -# or -# shadow-exclude = 'bounding_shaped && !rounded_corners' -# instead. -# -# shadow-ignore-shaped = '' - -# Specify a list of conditions of windows that should have no shadow. -# -# examples: -# shadow-exclude = "n:e:Notification"; -# -# shadow-exclude = [] -shadow-exclude = [ - "name = 'Notification'", - "class_g = 'Conky'", - "class_g ?= 'Notify-osd'", - "class_g = 'Cairo-clock'", - "class_g = 'slop'", - "class_g = 'Polybar'", - "class_g = 'firefox'", - "_GTK_FRAME_EXTENTS@:c" -]; - -# Specify a X geometry that describes the region in which shadow should not -# be painted in, such as a dock window region. Use -# shadow-exclude-reg = "x10+0+0" -# for example, if the 10 pixels on the bottom of the screen should not have shadows painted on. -# -# shadow-exclude-reg = "" - -# Crop shadow of a window fully on a particular Xinerama screen to the screen. -# xinerama-shadow-crop = false - - -################################# -# Fading # -################################# - - -# Fade windows in/out when opening/closing and when opacity changes, -# unless no-fading-openclose is used. -# fading = false -fading = true; - -# Opacity change between steps while fading in. (0.01 - 1.0, defaults to 0.028) -fade-in-step = 0.028 - -# Opacity change between steps while fading out. (0.01 - 1.0, defaults to 0.03) -fade-out-step = 0.03 - -# The time between steps in fade step, in milliseconds. (> 0, defaults to 10) -# fade-delta = 10 - -# Specify a list of conditions of windows that should not be faded. -# don't need this, we disable fading for all normal windows with wintypes: {} -fade-exclude = [ - "class_g = 'slop'" # maim -] - -# Do not fade on window open/close. -# no-fading-openclose = false - -# Do not fade destroyed ARGB windows with WM frame. Workaround of bugs in Openbox, Fluxbox, etc. -# no-fading-destroyed-argb = false - - -################################# -# Transparency / Opacity # -################################# - - -# Opacity of inactive windows. (0.1 - 1.0, defaults to 1.0) -# inactive-opacity = 1 -inactive-opacity = 0.95; - -# Opacity of window titlebars and borders. (0.1 - 1.0, disabled by default) -# frame-opacity = 1.0 -frame-opacity = 0.7; - -# Default opacity for dropdown menus and popup menus. (0.0 - 1.0, defaults to 1.0) -# menu-opacity = 1.0 -# menu-opacity is depreciated use dropdown-menu and popup-menu instead. - -#If using these 2 below change their values in line 510 & 511 aswell -popup_menu = { opacity = 0.8; } -dropdown_menu = { opacity = 0.8; } - - -# Let inactive opacity set by -i override the '_NET_WM_OPACITY' values of windows. -# inactive-opacity-override = true -inactive-opacity-override = false; - -# Default opacity for active windows. (0.0 - 1.0, defaults to 1.0) -active-opacity = 1.0; - -# Dim inactive windows. (0.0 - 1.0, defaults to 0.0) -# inactive-dim = 0.0 - -# Specify a list of conditions of windows that should always be considered focused. -# focus-exclude = [] -focus-exclude = [ - "class_g = 'Cairo-clock'", - "class_g = 'Bar'", # lemonbar - "class_g = 'slop'" # maim -]; - -# Use fixed inactive dim value, instead of adjusting according to window opacity. -# inactive-dim-fixed = 1.0 - -# Specify a list of opacity rules, in the format `PERCENT:PATTERN`, -# like `50:name *= "Firefox"`. picom-trans is recommended over this. -# Note we don't make any guarantee about possible conflicts with other -# programs that set '_NET_WM_WINDOW_OPACITY' on frame or client windows. -# example: -# opacity-rule = [ "80:class_g = 'URxvt'" ]; -# -# opacity-rule = [] -opacity-rule = [ - "100:fullscreen", - "80:class_g = 'Bar'", # lemonbar - "100:class_g = 'slop'", # maim - "80:class_g = 'Polybar'", - "95:class_g = 'firefox' && !focused" -]; - - -################################# -# Background-Blurring # -################################# - - -# Parameters for background blurring, see the *BLUR* section for more information. -# blur-method = -# blur-size = 12 -# -# blur-deviation = false - -# Blur background of semi-transparent / ARGB windows. -# Bad in performance, with driver-dependent behavior. -# The name of the switch may change without prior notifications. -# -# blur-background = true; - -# Blur background of windows when the window frame is not opaque. -# Implies: -# blur-background -# Bad in performance, with driver-dependent behavior. The name may change. -# -# blur-background-frame = false; - - -# Use fixed blur strength rather than adjusting according to window opacity. -# blur-background-fixed = false; - - -# Specify the blur convolution kernel, with the following format: -# example: -# blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1"; -# -# blur-kern = '' -# blur-kern = "3x3box"; - -blur: { - # requires: https://github.com/ibhagwan/picom - method = "dual_kawase"; - #method = "kernel"; - strength = 3; - # deviation = 1.0; - # kernel = "11x11gaussian"; - background = false; - background-frame = false; - background-fixed = false; - kern = "3x3box"; -} - -# Exclude conditions for background blur. -blur-background-exclude = [ - #"window_type = 'dock'", - #"window_type = 'desktop'", - #"class_g = 'kitty'", - # - # prevents picom from blurring the background - # when taking selection screenshot with `main` - # https://github.com/naelstrof/maim/issues/130 - "class_g = 'slop'", - "_GTK_FRAME_EXTENTS@:c" -]; - - -################################# -# General Settings # -################################# - -# Daemonize process. Fork to background after initialization. Causes issues with certain (badly-written) drivers. -# daemon = false - -# Specify the backend to use: `xrender`, `glx`, or `xr_glx_hybrid`. -# `xrender` is the default one. -# -experimental-backends = true; -backend = "glx"; -#backend = "xrender"; - - -# Enable/disable VSync. -# vsync = false -vsync = true - -# Enable remote control via D-Bus. See the *D-BUS API* section below for more details. -# dbus = false - -# Try to detect WM windows (a non-override-redirect window with no -# child that has 'WM_STATE') and mark them as active. -# -# mark-wmwin-focused = false -mark-wmwin-focused = true; - -# Mark override-redirect windows that doesn't have a child window with 'WM_STATE' focused. -mark-ovredir-focused = false -# mark-ovredir-focused = true; - -# Try to detect windows with rounded corners and don't consider them -# shaped windows. The accuracy is not very high, unfortunately. -# -# detect-rounded-corners = false -detect-rounded-corners = true; - -# Detect '_NET_WM_OPACITY' on client windows, useful for window managers -# not passing '_NET_WM_OPACITY' of client windows to frame windows. -# -# detect-client-opacity = false -detect-client-opacity = true; - -# Specify refresh rate of the screen. If not specified or 0, picom will -# try detecting this with X RandR extension. -# -# refresh-rate = 60 -refresh-rate = 0 - -# Limit picom to repaint at most once every 1 / 'refresh_rate' second to -# boost performance. This should not be used with -# vsync drm/opengl/opengl-oml -# as they essentially does sw-opti's job already, -# unless you wish to specify a lower refresh rate than the actual value. -# -# sw-opti = - -# Use EWMH '_NET_ACTIVE_WINDOW' to determine currently focused window, -# rather than listening to 'FocusIn'/'FocusOut' event. Might have more accuracy, -# provided that the WM supports it. -# -# use-ewmh-active-win = false - -# Unredirect all windows if a full-screen opaque window is detected, -# to maximize performance for full-screen windows. Known to cause flickering -# when redirecting/unredirecting windows. paint-on-overlay may make the flickering less obvious. -# -# unredir-if-possible = false - -# Delay before unredirecting the window, in milliseconds. Defaults to 0. -# unredir-if-possible-delay = 0 - -# Conditions of windows that shouldn't be considered full-screen for unredirecting screen. -# unredir-if-possible-exclude = [] - -# Use 'WM_TRANSIENT_FOR' to group windows, and consider windows -# in the same group focused at the same time. -# -# detect-transient = false -detect-transient = true - -# Use 'WM_CLIENT_LEADER' to group windows, and consider windows in the same -# group focused at the same time. 'WM_TRANSIENT_FOR' has higher priority if -# detect-transient is enabled, too. -# -# detect-client-leader = false -detect-client-leader = true - -# Resize damaged region by a specific number of pixels. -# A positive value enlarges it while a negative one shrinks it. -# If the value is positive, those additional pixels will not be actually painted -# to screen, only used in blur calculation, and such. (Due to technical limitations, -# with use-damage, those pixels will still be incorrectly painted to screen.) -# Primarily used to fix the line corruption issues of blur, -# in which case you should use the blur radius value here -# (e.g. with a 3x3 kernel, you should use `--resize-damage 1`, -# with a 5x5 one you use `--resize-damage 2`, and so on). -# May or may not work with *--glx-no-stencil*. Shrinking doesn't function correctly. -# -# resize-damage = 1 - -# Specify a list of conditions of windows that should be painted with inverted color. -# Resource-hogging, and is not well tested. -# -# invert-color-include = [] - -# GLX backend: Avoid using stencil buffer, useful if you don't have a stencil buffer. -# Might cause incorrect opacity when rendering transparent content (but never -# practically happened) and may not work with blur-background. -# My tests show a 15% performance boost. Recommended. -# -# glx-no-stencil = false - -# GLX backend: Avoid rebinding pixmap on window damage. -# Probably could improve performance on rapid window content changes, -# but is known to break things on some drivers (LLVMpipe, xf86-video-intel, etc.). -# Recommended if it works. -# -# glx-no-rebind-pixmap = false - -# Disable the use of damage information. -# This cause the whole screen to be redrawn everytime, instead of the part of the screen -# has actually changed. Potentially degrades the performance, but might fix some artifacts. -# The opposing option is use-damage -# -# no-use-damage = false -#use-damage = true (Causing Weird Black semi opaque rectangles when terminal is opened) -#Changing use-damage to false fixes the problem -use-damage = false - -# Use X Sync fence to sync clients' draw calls, to make sure all draw -# calls are finished before picom starts drawing. Needed on nvidia-drivers -# with GLX backend for some users. -# -# xrender-sync-fence = false - -# GLX backend: Use specified GLSL fragment shader for rendering window contents. -# See `compton-default-fshader-win.glsl` and `compton-fake-transparency-fshader-win.glsl` -# in the source tree for examples. -# -# glx-fshader-win = '' - -# Force all windows to be painted with blending. Useful if you -# have a glx-fshader-win that could turn opaque pixels transparent. -# -# force-win-blend = false - -# Do not use EWMH to detect fullscreen windows. -# Reverts to checking if a window is fullscreen based only on its size and coordinates. -# -# no-ewmh-fullscreen = false - -# Dimming bright windows so their brightness doesn't exceed this set value. -# Brightness of a window is estimated by averaging all pixels in the window, -# so this could comes with a performance hit. -# Setting this to 1.0 disables this behaviour. Requires --use-damage to be disabled. (default: 1.0) -# -# max-brightness = 1.0 - -# Make transparent windows clip other windows like non-transparent windows do, -# instead of blending on top of them. -# -# transparent-clipping = false - -# Set the log level. Possible values are: -# "trace", "debug", "info", "warn", "error" -# in increasing level of importance. Case doesn't matter. -# If using the "TRACE" log level, it's better to log into a file -# using *--log-file*, since it can generate a huge stream of logs. -# -# log-level = "debug" -log-level = "info"; - -# Set the log file. -# If *--log-file* is never specified, logs will be written to stderr. -# Otherwise, logs will to written to the given file, though some of the early -# logs might still be written to the stderr. -# When setting this option from the config file, it is recommended to use an absolute path. -# -# log-file = '/path/to/your/log/file' - -# Show all X errors (for debugging) -# show-all-xerrors = false - -# Write process ID to a file. -# write-pid-path = '/path/to/your/log/file' - -# Window type settings -# -# 'WINDOW_TYPE' is one of the 15 window types defined in EWMH standard: -# "unknown", "desktop", "dock", "toolbar", "menu", "utility", -# "splash", "dialog", "normal", "dropdown_menu", "popup_menu", -# "tooltip", "notification", "combo", and "dnd". -# -# Following per window-type options are available: :: -# -# fade, shadow::: -# Controls window-type-specific shadow and fade settings. -# -# opacity::: -# Controls default opacity of the window type. -# -# focus::: -# Controls whether the window of this type is to be always considered focused. -# (By default, all window types except "normal" and "dialog" has this on.) -# -# full-shadow::: -# Controls whether shadow is drawn under the parts of the window that you -# normally won't be able to see. Useful when the window has parts of it -# transparent, and you want shadows in those areas. -# -# redir-ignore::: -# Controls whether this type of windows should cause screen to become -# redirected again after been unredirected. If you have unredir-if-possible -# set, and doesn't want certain window to cause unnecessary screen redirection, -# you can set this to `true`. -# -wintypes: -{ - normal = { fade = false; shadow = false; } - tooltip = { fade = true; shadow = true; opacity = 0.75; focus = true; full-shadow = false; }; - dock = { shadow = false; } - dnd = { shadow = false; } - popup_menu = { opacity = 0.8; } - dropdown_menu = { opacity = 0.8; } -}; diff --git a/config/polybar/colors.ini b/config/polybar/colors.ini deleted file mode 100755 index a76c124..0000000 --- a/config/polybar/colors.ini +++ /dev/null @@ -1,18 +0,0 @@ -[colors] -background = #282a36 -current-line = #44475a -foreground = #f8f8f2 -comment = #6272a4 - -cyan = #8be9fd -green = #50fa7b -orange = #ffb86c -pink = #ff79c6 -purple = #bd93f9 -red = #ff5555 -yellow = #f1fa8c - -foreground-alt = ${self.foreground} -background-alt = #1E2029 -primary = ${self.pink} -secondary = ${self.green} diff --git a/config/polybar/config.ini b/config/polybar/config.ini deleted file mode 100755 index 7a4481a..0000000 --- a/config/polybar/config.ini +++ /dev/null @@ -1,281 +0,0 @@ -; Global WM Settings - -[global/wm] -; Adjust the _NET_WM_STRUT_PARTIAL top value -; Used for top aligned bars -margin-bottom = 0 - -; Adjust the _NET_WM_STRUT_PARTIAL bottom value -; Used for bottom aligned bars -margin-top = 0 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; File Inclusion -; include an external file, like module file, etc. - -#include-file = ~/.config/polybar/colors.ini -#include-file = ~/.config/polybar/modules.ini -#include-file = ~/.config/polybar/custom/modules.ini - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[bar/bottom] -; Use either of the following command to list available outputs: -; If unspecified, the application will pick the first one it finds. -; $ polybar -m | cut -d ':' -f 1 -; $ xrandr -q | grep " connected" | cut -d ' ' -f1 -monitor = ${env:MONITOR} - -; Use the specified monitor as a fallback if the main one is not found. -monitor-fallback = - -; Require the monitor to be in connected state -; XRandR sometimes reports my monitor as being disconnected (when in use) -monitor-strict = false - -; Tell the Window Manager not to configure the window. -; Use this to detach the bar if your WM is locking its size/position. -override-redirect = false - -; Put the bar at the bottom of the screen -bottom = true - -; Prefer fixed center position for the `modules-center` block -; When false, the center position will be based on the size of the other blocks. -fixed-center = true - -; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), -; the percentage can optionally be extended with a pixel offset like so: -; 50%:-10, this will result in a width or height of 50% minus 10 pixels -width = 100% -height = 25 - -; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) -; the percentage can optionally be extended with a pixel offset like so: -; 50%:-10, this will result in an offset in the x or y direction -; of 50% minus 10 pixels -offset-x = 0% -offset-y = 0% - -; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) -background = ${colors.background-alt} - -; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) -foreground = ${colors.foreground} - -; Background gradient (vertical steps) -; background-[0-9]+ = #aarrggbb -;;background-0 = - -; Value used for drawing rounded corners -; Note: This shouldn't be used together with border-size because the border -; doesn't get rounded -; Individual top/bottom values can be defined using: -; radius-{top,bottom} -radius-top = 0.0 -radius-bottom = 0.0 - -; Under-/overline pixel size and argb color -; Individual values can be defined using: -; {overline,underline}-size -; {overline,underline}-color -line-size = 3 -line-color = ${colors.pink} - -; Values applied to all borders -; Individual side values can be defined using: -; border-{left,top,right,bottom}-size -; border-{left,top,right,bottom}-color -; The top and bottom borders are added to the bar height, so the effective -; window height is: -; height + border-top-size + border-bottom-size -; Meanwhile the effective window width is defined entirely by the width key and -; the border is placed withing this area. So you effectively only have the -; following horizontal space on the bar: -; width - border-right-size - border-left-size -border-size = 0 -border-bottom-color = ${colors.pink} - -; Number of spaces to add at the beginning/end of the bar -; Individual side values can be defined using: -; padding-{left,right} -padding-left = 1 -padding-right = 1 - -; Number of spaces to add before/after each module -; Individual side values can be defined using: -; module-margin-{left,right} -module-margin-left = 1 -module-margin-right = 1 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -; Fonts are defined using ; -; Font names are specified using a fontconfig pattern. -; font-0 = NotoSans-Regular:size=8;2 -; font-1 = MaterialIcons:size=10 -; font-2 = Termsynu:size=8;-1 -; font-3 = FontAwesome:size=10 -; See the Fonts wiki page for more details - -font-0 = "FiraCode Nerd Font:size=11;0" - -; Modules are added to one of the available blocks -; modules-left = cpu ram -; modules-center = xwindow xbacklight -; modules-right = ipc clock - -modules-left = cpu memory wlan eth battery -modules-center = bspwm -modules-right = pulseaudio date powermenu - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -; The separator will be inserted between the output of each module -separator = - -; Opacity value between 0.0 and 1.0 used on fade in/out -dim-value = 1.0 - -; Value to be used to set the WM_NAME atom -; If the value is empty or undefined, the atom value -; will be created from the following template: polybar-[BAR]_[MONITOR] -; NOTE: The placeholders are not available for custom values -wm-name = - -; Locale used to localize various module data (e.g. date) -; Expects a valid libc locale, for example: sv_SE.UTF-8 -locale = - -; Position of the system tray window -; If empty or undefined, tray support will be disabled -; NOTE: A center aligned tray will cover center aligned modules -; -; Available positions: -; left -; center -; right -; none -tray-position = right - -; If true, the bar will not shift its -; contents when the tray changes -tray-detached = false - -; Tray icon max size -tray-maxsize = 16 - -; Background color for the tray container -; ARGB color (e.g. #f00, #ff992a, #ddff1023) -; By default the tray container will use the bar -; background color. -tray-background = ${colors.background-alt} - -; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) -tray-offset-x = 0 -tray-offset-y = 0 - -; Pad the sides of each tray icon -tray-padding = 2 - -; Scale factor for tray clients -tray-scale = 1.0 - -; Restack the bar window and put it above the -; selected window manager's root -; -; Fixes the issue where the bar is being drawn -; on top of fullscreen window's -; -; Currently supported WM's: -; bspwm -; i3 (requires: `override-redirect = true`) -wm-restack = bspwm - -; Set a DPI values used when rendering text -; This only affects scalable fonts -; dpi = - -; Enable support for inter-process messaging -; See the Messaging wiki page for more details. -enable-ipc = true - -; Fallback click handlers that will be called if -; there's no matching module handler found. -click-left = -click-middle = -click-right = -scroll-up = -scroll-down = -double-click-left = -double-click-middle = -double-click-right = - -; Requires polybar to be built with xcursor support (xcb-util-cursor) -; Possible values are: -; - default : The default pointer as before, can also be an empty string (default) -; - pointer : Typically in the form of a hand -; - ns-resize : Up and down arrows, can be used to indicate scrolling -cursor-click = pointer -cursor-scroll = ns-resize - -;; WM Workspace Specific - -; bspwm -;;scroll-up = #bspwm.next -;;scroll-down = #bspwm.prev -;;scroll-up = bspc desktop -f prev.local -;;scroll-down = bspc desktop -f next.local - -;i3 -;;scroll-up = i3wm-wsnext -;;scroll-down = i3wm-wsprev -;;scroll-up = i3-msg workspace next_on_output -;;scroll-down = i3-msg workspace prev_on_output - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - - -;; Application Settings - -[settings] -; The throttle settings lets the eventloop swallow up til X events -; if they happen within Y millisecond after first event was received. -; This is done to prevent flood of update event. -; -; For example if 5 modules emit an update event at the same time, we really -; just care about the last one. But if we wait too long for events to swallow -; the bar would appear sluggish so we continue if timeout -; expires or limit is reached. -throttle-output = 5 -throttle-output-for = 10 - -; Time in milliseconds that the input handler will wait between processing events -;throttle-input-for = 30 - -; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events -screenchange-reload = true -; Compositing operators -; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t -;;compositing-background = source -;;compositing-foreground = over -;;compositing-overline = over -;;compositing-underline = over -;;compositing-border = over - -; Define fallback values used by all module formats -;format-foreground = -;format-background = -;format-underline = -;format-overline = -;format-spacing = -;format-padding = -;format-margin = -;format-offset = - -; Enables pseudo-transparency for the bar -; If set to true the bar can be transparent without a compositor. -pseudo-transparency = false - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/config/polybar/launch.sh b/config/polybar/launch.sh deleted file mode 100755 index cca90a1..0000000 --- a/config/polybar/launch.sh +++ /dev/null @@ -1,14 +0,0 @@ -#!/usr/bin/env bash - -# Terminate already running bar instances -pkill -u $UID -x polybar - -# Wait until the processes have been shut down -while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done - -# Launch Polybar -for m in $(polybar --list-monitors | cut -d":" -f1); do - MONITOR=$m polybar --reload bottom & -done - -echo "Polybar launched..." diff --git a/config/polybar/modules.ini b/config/polybar/modules.ini deleted file mode 100755 index 5cd13b7..0000000 --- a/config/polybar/modules.ini +++ /dev/null @@ -1,224 +0,0 @@ -[module/battery] -type= internal/battery -battery= BATT -adapter= ACAD - -; see "man date" for details on how to format the time string -; NOTE: if you want to use syntax tags here you need to use %%{...} -; Default: %H:%M:%S -time-format = %H:%M - -; Available tags: -; (default) -; -; -; -format-charging = -format-charging-underline = ${colors.green} - -; Available tags: -; (default) -; -; -; -format-discharging = -format-discharging-underline = ${colors.red} - -; Available tags: -; (default) -; -; -format-full = -format-full-underline = ${colors.green} - -; Available tokens: -; %percentage% (default) - is set to 100 if full-at is reached -; %percentage_raw% -; %time% -; %consumption% (shows current charge rate in watts) -label-charging = %percentage%% %time% remaining - -; Available tokens: -; %percentage% (default) - is set to 100 if full-at is reached -; %percentage_raw% -; %time% -; %consumption% (shows current discharge rate in watts) -label-discharging = %percentage%% %time% remaining - -; Available tokens: -; %percentage% (default) - is set to 100 if full-at is reached -; %percentage_raw% -label-full = Fully charged - -; Only applies if is used -ramp-capacity-0 =  -ramp-capacity-1 =  -ramp-capacity-2 =  -ramp-capacity-3 =  -ramp-capacity-4 =  - -; Only applies if is used -bar-capacity-width = 10 - -; Only applies if is used -animation-charging-0 =  -animation-charging-1 =  -animation-charging-2 =  -animation-charging-3 =  -animation-charging-4 =  -; Framerate in milliseconds -animation-charging-framerate = 750 - -; Only applies if is used -animation-discharging-0 =  -animation-discharging-1 =  -animation-discharging-2 =  -animation-discharging-3 =  -animation-discharging-4 =  -; Framerate in milliseconds -animation-discharging-framerate = 500 - -[module/bspwm] -type = internal/bspwm - -reverse-scroll = false - -label-focused =  -label-focused-foreground = ${colors.purple} -label-focused-padding = 1 - -label-occupied =  -label-occupied-foreground = ${colors.comment} -label-occupied-padding = 1 - -label-urgent =  -label-urgent-foreground = ${colors.red} -label-urgent-padding = 1 - -label-empty =  -label-empty-foreground = ${colors.comment} -; label-empty-background = ${colors.pink} -label-empty-padding = 1 - -label-separator = " " -label-separator-foreground = ${colors.cyan} -label-separator-padding = 1 - -pin-workspaces = true - -[module/cpu] -type = internal/cpu -interval = 2 -format-prefix = " " -format-prefix-foreground = ${colors.red} -format-underline = ${colors.red} -label = %percentage:2%% - -[module/date] -type = internal/date -interval = 5 - -date = "%A" -date-alt = " %Y-%m-%d" - -time = %H:%M -time-alt = %H:%M:%S - -format-underline = ${colors.purple} - -label = %date% %time% - -[module/eth] -type = internal/network -interface = enp42s0 -interval = 3.0 - -format-connected-underline = ${colors.purple} -label-connected = "%upspeed% %downspeed%" - -[module/memory] -type = internal/memory -interval = 2 -format-prefix = " " -format-prefix-foreground = ${colors.green} -format-underline = ${colors.green} - -label = %percentage_used%% -click-left=kitty bpytop - -[module/powermenu] -type = custom/menu - -expand-right = false - -format-spacing = 1 - -label-open = "" -label-open-foreground = ${colors.orange} -label-close = "" -label-close-foreground = ${colors.red} -label-separator = | -label-separator-foreground = ${colors.cyan} - -menu-0-0 = " " -menu-0-0-exec = #powermenu.open.1 -menu-0-1 = " " -menu-0-1-exec = #powermenu.open.2 -menu-0-2 = " " -menu-0-2-exec = #powermenu.open.3 - -menu-1-0 = " " -menu-1-0-exec = systemctl reboot - -menu-2-0 = " " -menu-2-0-exec = systemctl poweroff - -menu-3-0 = " " -menu-3-0-exec = systemctl hibernate - - -[module/pulseaudio] -type = internal/pulseaudio - -format-volume = -label-volume = %percentage%% -label-volume-foreground = ${colors.foreground} - -label-muted = " muted" -label-muted-foreground = ${colors.foreground-alt} - -bar-volume-width = 12 -bar-volume-foreground-0 = ${colors.green} -bar-volume-foreground-1 = ${colors.green} -bar-volume-foreground-2 = ${colors.green} -bar-volume-foreground-3 = ${colors.green} -bar-volume-foreground-4 = ${colors.green} -bar-volume-foreground-5 = ${colors.orange} -bar-volume-foreground-6 = ${colors.orange} -bar-volume-foreground-7 = ${colors.orange} -bar-volume-foreground-8 = ${colors.red} -bar-volume-gradient = true -bar-volume-indicator = | -bar-volume-indicator-font = 2 -bar-volume-fill = - -bar-volume-fill-font = 2 -bar-volume-empty = - -bar-volume-empty-font = 2 -bar-volume-empty-foreground = ${colors.foreground} - -click-middle=pavucontrol -click-right=~/bin/cycle_sinks.sh - -[module/wlan] -type = internal/network -interface = wlp1s0 -interval = 3.0 - -format-connected-underline = ${colors.purple} -label-connected = "%upspeed% %downspeed%" - -[module/xwindow] -type = internal/xwindow -format =